Gravity GTMS4321B Touring Series Tripod Microphone Stand with Standard Boom

Gravity GTMS4321B Touring Series Tripod Microphone Stand with Standard Boom

Gravity Stands SP 2342 B 35mm to M20 Adjustable Speaker Pole (5.9')

Gravity Stands SP 2342 B 35mm to M20 Adjustable Speaker Pole (5.9')

Skjonberg CS-800LX 8-Ch Hoist Control/ 7 Pin Outputs

$2,699.00
SKU
303622

Skjonberg CS-800LX

8 Channel Hoist Control/ 7 Pin Outputs (remote unit and case not included )
Item #:CS-800LX 

The CS-800LX is the single plug version of our popular CS-800 hoist relay control. Hoists running through 7 pin Socapex, 7 pin Litton Veam or 14 pin Cannon use the CS-800LX. This model has the same versatility and function as the CS-800. Eight chain motors can be run individually or in unison. Both power distribution and relay control for the hoists reside in the same compact unit. The basic design runs 3 phase motors at 208V-220V. The 50 amp input provides adequate current to  run eight 1hp motors. Each of the 4 circuit breakers protects 2 motors. Manual hoist selection and running is accomplished using any of our Remote Manual Run Handsets. A typical package is shown with our P8-CS-SQ-AK25 remote with 25 ft remote cable hardwired into the handset.

STANDARD FEATURES:

  • Runs up to 8 hoists
  • 50amp Hubbell power input connector
  • Litton, Veam or Socapex output connectors
  • Input phase reversal
  • Phase power indicators
  • 50amp main emergency disconnect contactors
  • Choice of chassis: 19" rack mountable or radial curved sides for standalone use
  • Branch circuit breaker, 2 hoists per breaker
  • Safety keyswitch for on/off and phase reversal input phase reversal
  • Protective bar over circuit breakers
  • Multi-pin connector to accept our standard remote cable

OPTIONAL FEATURES:

  • Road case with casters and remote storage pocket (shown)
  • Phase okay indicator light
  • Out of phase alarm or lockout function
  • Modification to run single phase hoists up to 50 amps total current
  • Phase selector switch in place of keyswitch

SPECIFICATIONS:

  • Rack mountable chassis dimensions:19.0 in.W x 15.75 in. H x 6.0 in. D
  • Standalone chassis dimensions: 16.5 in. W x 15.75 in. H x 7.0 in. D
  • Weight: 35 lbs.
  • Electrical: 208-240 vac, 50 amps, 50-60 hz, 3 phase

CS REMOTE FEATURES:

  • Square or slim shape
  • Detachable cable or hardwired cable models offered
  • Hardwired units have 25 ft cable with metal strain relief at each end for added strength
  • Up/down toggles with indicator leds for each hoist
  • Momentary run switch
  • Emergency stop/ power on/off toggle

 

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account