Yamaha EMX5 12 Input Power Mixer

• 2x 630W [4ohm], 2x 460W [8ohm] (1kHz THD+N less than 10% CEA2006)
• 2x 500W [4ohm], 2x 370W [8ohm] (1kHz THD+N less than 1% CEA2006)
• Powerful & High Efficiency Class-D Amplifier
• 12 Line Inputs (8 mono + 4 stereo)
• High-Z input (channel 4) to connect guitars or basses directly
• 1-Knob Master EQ™
• Onboard Feedback Suppressor
• Comprehensive, professional 24 different effects
• Metal chassis for extended operation and robustness
• Large handles for extreme portability and protection
• Universal power supply eliminates concern on power fluctuations
• Optional rack-mount kit available

- Inputs: TOTAL 12 channels, 8 Mono (MIC/LINE), 4 Stereo (LINE)
- Phantom power: +48 V
- Outputs: SPEAKERS [A, B], AUX1 SEND, AUX2 SEND, STEREO OUT [L, R], REC OUT [L, R]
- Control and others: FOOT SWITCH : Effect Mute on/off
- Bus: Stereo: 1, AUX 2 (Including FX)
- Input Channel Function:
- PAD: 30 dB (CH1-4)
- Hi-Z: Supported (CH4)
- HPF: 80 Hz, -12 dB/oct. (CH1-3)
- COMP: 1-knob COMP (CH1-4)
- EQ HIGH: 10 kHz +15 dB / -15 dB (Shelving)
- EQ MID: 2.5 kHz +15 dB / -15 dB (Peaking)
- EQ LOW: 100 Hz +15 dB / -15 dB (Shelving)
- On-board processors: DSP, SPX Algorithm 24 programs, Feedback suppressor, Graphic equalizer, Speaker processor
- On-board amplifiers:
- Maximum output power: @4ohms 1kHz THD+N less than 10% (CEA2006) : 710 W + 710 W, 1kHz THD+N less than 1% (CEA2006) : 600 W + 600 W
- Maximum output power: @8ohms 1kHz THD+N less than 10% (CEA2006) : 500 W + 500 W, 1kHz THD+N less than 1% (CEA2006) : 400 W + 400 W
- Level Meter: 2 x 12 points LED meter (-30, -25, -20, -15, -10, -6, -3, 0, +3, +6, +10, PEAK)
- Frequency response: Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz
- Total harmonic distortion: Input to SPEAKERS: MIC/LINE =LINE (CH1-4): 0.1% @ 10 W (40 Hz to 20 kHz), 0.04% @ 65 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: MIC/LINE =LINE (CH1-4): 0.02% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF)
- Hum & noise level:
- Equivalent input noise: -117 dBu (Noise is measured with A-weighting filter)
- Residual output noise: Input to SPEAKERS : -70 dBu(40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -82dBu(20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter)
- Crosstalk: -85 dB (1 kHz, Measured with 1 kHz band pass filter)
- Protection circuit:
- Load protection: DC-fault
- Amplifier protection: Over heat protection, Over current protection, Integral power protection
- Power supply protection: Over heat protection, Over current protection
- Power requirements: AC 100-240V, 50Hz/60Hz
- Power consumption: 45 W (Idle) / 250 W (1/8 Power)
- Dimensions: W 465 mm (18 5/16"), H 308 mm (12 1/8"), D 325 mm (12 13/16")
- Net weight: 9.5 kg (20.9 lbs)
- Accessories: Owner's Manual, Technical Specifications, AC power cord (2.5 m)

Weight, Dimensions, and Manufacturer Part Numbers

Base Item

Shipping Weight: 26 lbs

Shipping Dimensions: 22 x 15 x 15 in

Manufacturer Part Number (MPN): EMX5