Bose FreeSpace DS40F In-Ceiling Loudspeaker 8 Ohm 40W (160W Peak) - White
$252.00
SKU
8673
The Bose® FreeSpace DS 40F 8 ohm version is a versatile, high-performance, full-range, flush-mount loudspeaker designed for foreground and background music and speech reproduction in a wide range of installed applications. High output and 125° conical pattern with a frequency range down to 70 Hz.
Bose FreeSpace background/foreground loudspeakers are designed for a wide range of commercial audio applications, including retail shops, hotels, shopping malls, restaurants, conference rooms, bars and health clubs.
- Full-range loudspeaker with a single 4.5" (114 mm) driver in a ported enclosure to deliver a 125° conical coverage pattern and clear, intelligible music and speech reproduction for flush-ceiling or pendant-mount applications
- Shortcan design allows installation in shallower ceilings with minimum depth of 6.4" (163 mm)
- Shared voicing across entire FreeSpace DS product family enables DS 16, DS 40 and DS 100 loudspeakers to be integrated on the same system and maintain consistent tonal quality
- Supported by a suite of accessories, including ceiling-mount bracket, adjustable tile bridge, pendant-mount kit and square grille
| System Performance | |
|---|---|
| Frequency Response (+/-3 dB) | 80 Hz - 17 kHz |
| Frequency Range (-10 dB) | 70 Hz - 19 kHz |
| Nominal Dispersion | 125° conical |
| Recommended High-Pass Filter | 70 Hz high-pass filter |
| Loudspeaker EQ | Recommended |
| Overload Protection | PTC/Resistor |
| Long-Term Power Handling | 40W (160W peak) |
| Sensitivity (SPL / 1 W @ 1 m) | 87 dB SPL |
| Maximum SPL @ 1 m | 103 dB SPL (109 dB SPL peak) |
| Nominal Impedance | 8? |
| Transducers | |
| Driver Compliment | 4.5" (114 mm) full-range driver |
| Physical | |
| Enclosure | Polypropylene (front baffle), powder-coated steel (rear enclosure) |
| Grille | Powder-coated steel grille |
| Environmental | Indoor use only |
| Connectors | Two-terminal barrier strip (8 ohm variant) Optional accessory available for use when ceramic connector and thermalfuse are required Wire gauge: 18 AWG (0.8 mm) to 14 AWG (2.0 mm) |
| Suspension / Mounting | Three integrated quick-install mounting arms Three mounting points at the rear of the enclosure for use with optional accessory pendant mountkit Safety cable attachment: .35" (8.9 mm) diameter hole on junction box |
| Dimensions (Enclosure only) | Outer flange diameter: 11.8" (300 mm) Depth: 6.0" (153 mm) Ceiling hole diameter: 10.5" (267 mm) |
| Ceiling Thickness (Maximum) | 2.5" (64 mm) |
| Weight | 6.3 lbs (2.8 kg) |
| Shipping Weight | 9 lbs (4.1 kg) |
Write Your Own Review
FREE
SHIPPING
100% MONEY
BACK GUARANTEE
ONLINE
SUPPORT 24/7
Featured
